How to Replace a Saab 9-3 Key
The Saab 9-3 has an impressive attraction for drivers. It offers good visibility and an impressive performance engine. It also has a great safety rating.
However, it's important to ensure that you have at least two keys that are working for your vehicle. It could be costly to replace a key in the event that you lose it.
How to replace the ignition Key in the Saab9-3
If your car's keys won't engage in the ignition, you need to replace it. This guide will guide you through how to do it on the Saab 9-3. You'll have to replace the key, purchase another reprogrammable device, and purchase a new case for your key-fob.
Modern Saab models make use of transponders instead of a key made of metal to unlock the vehicle and allow it to start. The reprogrammable batteries inside the key-fob will eventually become worn out and cannot hold any charge. This is especially when you keep using the same key with the same lock.
A professional locksmith can change the battery with ease. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to remove the key-fob. Insert an open-ended head into the slot that is in the middle of your case. It is essential to take your time, as the plastic is extremely thin and can easily be damaged.
Once the case is opened then you can prepare the new key by combining the lower half of the old key with the transponder and banana on the new key. This will ensure that the new key is properly paired to your CIM, which can be a major difference when replacing the sole keys for your Saab 9-3.
How do you replace the ignition Key on a Saab 900
If you don't have two keys you'll have to remove the dashboard and steering wheel to get to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you are able to remove the dashboard and trim pieces that surround the steering wheel. Once the dash is taken off, you can push a screwdriver into the hole at the back of the ignition switch and take it out.
The ignition cylinder is equipped with a lock for keys that can prevent the vehicle from starting if you don't have the key inside it. If the ignition switch on your 900 isn't working correctly, make sure to check if the key is in the lock or inside the barrel. It is also recommended to rotate your keys and keep them clean to prevent bent.
Saab cars are different from other cars because they don't utilize traditional metal keys. Instead, the car detects the electronic signals from the key fob through a special chip embedded in it.
If you have lost your only working key fob, the dealer will charge the highest dollar for the replacement of the computer module (known as the CIM). However, saab key fob repair www.g28carkeys.co.uk can reprogram the existing computer EEPROM and prepare it to accept new keys without replacing it. This can save you more than 50% of what the dealer charges! We call it the SAAB Key PROGRAM. Find out more about it here!
How to replace the ignition Key on a Saab 9-5
The metal component of a classic Saab key is easy to copy, and it's also not much of a barrier against theft of vehicles. The electronic part of the key-fob is equipped with a chip that can recognize the car when the key is inserted into the ignition switch.
Saab has relied on the technology of this anti-theft system for more than a decade. It's not as good as a physical lock on the door, but it does make stealing your own car significantly more difficult. This is why every Saab owner should always keep a spare key on hand.
The majority of new Saabs are delivered with two keys, but they can be added by the dealer's expense using a handheld device referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 cars, with more modern, newer features that require keys-fobs.
The dealer will replace the CIM or TWICE module in those vehicles if all keys have been lost, and charge you top dollar for this. But we can reprogram the EEPROM in your existing computer and set it up to accept new keys, without having to replace the expensive modules.
How to Replace the Ignition Key on the Saab XC90
It may be time to replace your SAAB key fob if you're having difficulty turning the lock barrel. The process is fairly simple and you don't even need to visit a dealership. Instead, you can do it yourself at home with some basic tools.
First, you'll need to prepare the new keys. Before starting, make sure that the anti-theft device is disabled by placing blocks on your rear wheels and engaging the handbrake. Insert the key into the ignition and turn it to the "on" position. This will activate the accessories, but will not start the engine. Repeat this procedure 5 times, and then keep the key on the "on" position.
The next step is to find a new case for your old key fob. They can be found at any auto parts store and they're generally quite affordable. Based on the model, you can even buy them without electronic components.
To open up the case, put an flathead screwdriver into the slot in the middle and slowly work it. After you've separated the case, you will be able to access all the internal electronics. Use a flathead screwdriver to gently remove the electronics.